Cloud services are used to send data to the cloud. This is useful for monitoring the device remotely and get the latest firmware updates.
LED brightness is used to adjust the brightness of the status LED on the device. Keeping a small amount of brightness is recommended.
50%Logging is used to record events and errors. It is useful for debugging and troubleshooting.
Print logging is used to display events and errors when the serial monitor is available. The serial monitor is available when the device is connected to a computer via USB.
Save logging is used to record events and errors to the internal memory of the device. The internal memory is limited, so it is recommended to only use this for troubleshooting.
Sync the device time with your browser. Useful for devices without internet connectivity (isolated networks).
Device time: Loading...
Change your password to secure your device. Default credentials should be changed immediately after first login.
You already know that restarting a device magically fixes most issues. It will take 10 seconds.
Enter new WiFi credentials to switch to a different network. The device will save the credentials and restart to connect to the new network.
This will erase the WiFi credentials.
The device will create a WiFi network called "EnergyMe-XXXXXXXXXX" (where XXXXXXXXXX is the device ID) with no password. Connect to that network and navigate to http://192.168.4.1 (or http://energyme.local) if the device does not redirect you automatically. You can then configure the device to connect to your WiFi network.
This will reset the device to its factory settings. Useful if you are having issues with the device or want to start fresh.
WiFi credentials will be kept.